We designed the Banzai Racing Billet Aluminum Oil Filter Pedestal as a direct replacement for the OEM FD & Cosmo 13B-RE/20B pedestal. The Pedestal is designed to accommodate both FD & FC oil filters and is 4mm shorter than FD OEM pedestal to allow for taller filters. It has one 1/4" NPT & three 1/8" NPT ports for sending units or loop lines. Our pedestal uses the same 18mm x 1.5 thread to allow the factory banjo bolt to be installed. It can also be used on all FC 13B motors with the addition of an 18mm plug.
The oil filter pedestals are available in anodized Black, with limited editions available in Red, Blue, Purple, Gold & Aluminum.
The pedestal kit comes with:1 x Billet Oil Filter Pedestal2 x Stainless Studs2 x Viton O-rings2 x Serrated Nuts3 x 1/8 NPT Plugs1 x 1/4 NPT Plug
Metric Port Plug; Size: M18 x 1.5, includes Crush Washer
Used on FC Rear Iron when installing Banzai Racing Billet Oil Filter Pedestal and Stainless Oil Cooler lines or to block port on pedestal when using OEM oil cooler lines.
-10AN to Metric Straight Adapter, Black Aluminum
Used on FC and RX-8 OEM Oil coolers.
The Mishimoto Oil Filter Sandwich Plate Adapters are made with 3 NPT ports to allow you to install an oil temperature sensor, oil pressure sensor, and/or a turbo oil feed. This easy-to-install plate eliminates the need to drill into your block by using the mounting point on your engine oil filter. Two adapters are included with purchase for fitment with multiple applications.
Overall Size 2.8" x 3.0" x 0.8"Purchase Includes(1) Oil Plate Sandwich Adapter with (3) 1/8" NPT Ports(1) Large O-ring(2) Sandwich Plate Adapters (1 x M20 x 1.5" & 1x 3/4" UNF 16)(2) Black Flush Fittings w/ Allen Key Bolt(1) Allen Key(1) Hex Head FittingInstallation GuideLimited Lifetime WarrantyMishimoto sticker
