The Radium Engineering high flow primary fuel rail is for the 20B-REW rotary engine originally found in the 1990-1995 Mazda/Eunos Cosmo. The aluminum fuel rail is anodized black for compatibility with all popular fuel types including E85. Manufactured with a large internal bore, the fuel rail can support all necessary engine power requirements.
Insulating phenolic spacers and washers are included with stainless steel hardware to prevent thermal energy from conducting heat into the fuel. The included 14mm lower injector seats were designed specifically to be compatible with or without the OEM diffusers in place. They feature Viton O-rings making them suitable for boosted applications.
The extra center port allows additional fuel system accessories such as the OEM fuel temperature sensor, a pressure transducer, Radium fuel pulse damper, etc.
Rail is designed to accommodate 34mm tall, 14mm top/bottom o-ring style injectors.
The Radium Engineering high flow secondary fuel rail is for the 20B rotary engine originally found in the 1990-1995 Mazda/Eunos Cosmo. The aluminum fuel rail is anodized black for compatibility with all popular fuel types including E85. Manufactured with a large internal bore, the fuel rail can support all necessary engine power requirements. Like the stock fuel rail, the rail features 11mm injector bores permitting the use of OEM fuel injectors
The three 8AN ORB ports, the extra center port allows additional fuel system accessories such as the OEM fuel temperature sensor (14-0421), a pressure transducer, Radium fuel pulse damper (20-0176), etc.
Rail is designed to accommodate 60mm tall, 11mm top o-ring style injectors.
This Radium Engineering secondary fuel rail is for aftermarket 6 injector intake manifolds that are produced for the Mazda 20B-REW rotary engine. The aluminum fuel rail is anodized black for compatibility with all popular fuel types including E85. Manufactured with a large internal bore, the fuel rail can support all necessary engine power requirements.
Rail is designed to accommodate 60mm tall, 14mm top & bottom o-ring style injectors.
These are the same machined aluminum injector seats used in Radium fuel rails for Mazda/Eunos Cosmo and RX-7 rotary engines. They are required when converting the OEM 16mm injector seat's counterbore to 14mm which is more common with popular injector lower O-rings. They simply "pop" into the OEM injectors bore. They were designed specifically to be compatible with or without the OEM fuel injector diffusers installed. They seal to the machined injector counterbore using the included Viton O-ring.
SOLD INDIVIDUALLY
13B-RE requires 4 total (2 primary+2 secondary)13B-REW requires 4 total (2 primary+2 secondary)20B-REW requires 6 total (3 primary+3 secondary)
